Hi, I also have an early s/n KX2, 024X. I had the same problem of the bowed Plexiglas cover. My cure was to grid off 1/16th strip on each end and elongate the screw holes carefully. No more bowing. GL 73 Jim H K7SSS In a message dated 8/24/2020 4:34:59 PM Pacific Standard Time, [email protected] writes: Hi folks-got a bit of an unusual issue with the plexiglass readout cover for my KX2. I use it a lot portable and SOTA and on an activation last week noticed that I had a few tiny interlopers crawling underneath the covering adding moving symbols to the display:)). After inspecting I noted that the plexiglass has slightly warped and bows up in the middle just enough to let the occasional spider mite or piece of vegetation to slip under the glass. I could put a small bead of caulk I guess but it’s such a small gap. Probably the result of having the radio outside a lot in the sun-but that’s what it’s designed for! Kinda fun to watch them dance around with the changing display.... Dan Presley 503-701-3871danpresley@me. com [email protected] ______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:[email protected] This list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.htmlMessage delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
