Hi all, I have the following effect on my KX3 equipped with the 2m module: Max Power is set to 3.0W If I set to TUNE I can increase the rf from 0 up to eg. 3.0W. But the power does only increase to about 650mW and the most confusing is the fact that in the display the power jumps back to 0.9W! A short movie can be see here:
https://www.mycloud.ch/l/P00BBFDF3256A56FD3D07AB35274144A50BF5F24AB9A6B837983B214C77EE5ADA Unmount all to check. The nut was no more soldered to the final transistor. Reload firmware Reload the last configuration when the TRX was working well. >> Still the same confusing effect. 73 Armin HB9MFL -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
