When unpowered the KAT500 is bypassed, ANT1. When the ATU is in mode BYP, yes, it’s bypassed.
73 de Dick, K6KR > On Sep 13, 2020, at 15:52, Dave Cole <[email protected]> wrote: > > Hello, > My KAT500 which worked yesterday, now shows a 3:1 on 18 MHz., only. Antenna > is a single feedline to a 6BTV, and an analyzer says all is good at low > power. At 100 watts, all seems good. > > All other bands seem OK at high power. > > Question: When in bypass, is the entire tuner bypassed? > Question: When turned off is the tuner bypassed? Which antenna is default? > -- > 73, and thanks, > Dave (NK7Z) > https://www.nk7z.net > ARRL Volunteer Examiner > ARRL Technical Specialist > ARRL Asst. Director, NW Division, Technical Resources > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
