Another small issue I have had is when I am on say 3710 KHz LSB and send the macro FA00007050000;MD3; the K3s goes to 7049.280 KHz CW sometimes. (720 Hz is my offset for CW) If I send FA00007050000;MD3; again right away it goes to 7050 KHz CW
Then when I send FA00003710000;MD1; the K3s goes to 3710.720 KHz LSB sometimes Again, if I send FA00003710000;MD1; again right away the K3s goes to 3710 KHz LSB. This has always been the case and has nothing to do with the wrong macro being sent... am I not allowing for something in my macros? Chuck Hawley [email protected] Amateur Radio, KE9UW ________________________________ From: Charles J. Hawley <[email protected]> Sent: Wednesday, September 16, 2020 12:30 PM To: [email protected] <[email protected]> Subject: K-POD Issues, But I Love It! I love this K-Pod, BUT I’ve sort of worn out 3 of them. The symptom is that the most used buttons get noisy and trigger another macro from another address. When I had the first one do that, I did extensive testing to eliminate rf noise, etc. And a new unit however proved to work perfectly...for about 4 months. When it started doing the same thing Elecraft said it was highly unlikely and especially twice to the same guy, but they sent me another one anyway. Great company! Now that one after a year is doing it again. I rearranged the macros to different buttons of the two macros I mostly use, and it works flawlessly again for those two. I doubt that Elecraft will keep sending me these things, maybe I’m missing something. But all I can come up with is noisy switches, double triggering. Anybody have similar issues? Jack BMW Motorcycles Chuck KE9UW [email protected] Sent from my iPad ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
