You don't need a lot of strength to do it! If it doesn't go in, probably
the tip isn't going into the socket. Check to see that the tip is
parallel to the shield portion of the connector. Make sure you are
putting it in straight. Don't try to force it -- when you have it lined
up right, it should go in.
Good luck.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
.
On 19/09/2020 18:57, Bob DeHaney wrote:
I removed my KRX3 to install a new filter. My problem is, I can't
re-insert one of the TMP connectors. It simply doesn't seat. I've
inspected the Tip and it looks OK.
I'm 80 and don't have super hand strength, but the first connector
went in normally.
Any suggestions?
Vy 73 de Bob DJ0RD/WU5T
______________________________________________________________
Elecraft mailing list Home:
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/mmfaq.htm Post:
mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this
email list: http://www.qsl.net/donate.html Message delivered to
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
