All, There is a selection (SVGA Ubmp) in the SVGA menus that will, according to the P3 manual, save a bmp file to a memory stick. Ref pp 43, 33 in the P3 Owners Manual Rev H1.
Ben W4SC Sent from Mail for Windows 10 From: Barry Baines Sent: Saturday, September 26, 2020 21:52 To: Don Wilhelm Cc: Mike Flowers; w4sc; [email protected] Subject: Re: [Elecraft] SVGA Screen save to memory stick Don: On Sep 26, 2020, at 9:06 PM, Don Wilhelm <[email protected]> wrote: Mike, Connector #22 is a USB port for a keyboard, not a general USB port. It is clearly labeled "KEYBOARD". You're absolutely correct to note the labeling and I’ve always presumed that is the connector is only for a keyboard. However, the "P3 HIgh-Performance Owner’s Manual" (Revision F, 11 JAN 16 p.12) does have this description of that connector: "KEYBOARD: USB jack for a USB keyboard or thumb drive (mass storage device). Apple keyboards are not supported at this time.” So the wording does suggest compatibility with thumb drives, but from what I can tell there is no discussion in the “Owner’s Manual" about how to utilize a thumb drive. Perhaps this may be a feature that was never actually developed. FWIW, Barry Baines, WD4ASW/1 (Currently in Boston/Roslindale, MA) 73, Don W3FPR On 9/26/2020 7:21 PM, Mike Flowers wrote: I have successfully captured a P3 screen image. Elecraft P3 Utility > Capture Image Tab> Capture Image button - this captures the image then displays 'Bitmap copied to Windows Clipboard' - then paste from the Clipboard into Paint or other app and save in the image format of your choice. My P3 manual states: "Connector openings {16}, {17}, {21}, and {22} are provided for future use." I think #22 is the USB port on the back of the P3. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
