P 24 of the owner's manual near the bottom: The ATU IN and the ATU BYP LEDs both illuminate to show the tuner is bypassed for this frequency. When returning to the selected frequency, the internal ATU will recall the bypass mode, and both ATU IN and the ATU BYP LEDs will be illuminated.
73 de Dick, K6KR -----Original Message----- From: [email protected] <[email protected]> On Behalf Of N4ZR Sent: Sunday, October 25, 2020 14:47 To: Elecraft List <[email protected]> Subject: [Elecraft] KPA-1500: What is it telling me? I have a dummy load on Ant 2 on my KPA-1500. When I have Ant 2 selected, on any bandI cannot select just "In." When I hold the button to change ATU Mode, my only choices are BYP or BYP and IN both showing simultaneously. What does the latter mean? -- 73, Pete N4ZR Check out the Reverse Beacon Network at <http://reversebeacon.net>, now spotting RTTY activity worldwide. For spots, please use your favorite "retail" DX cluster. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
