I have neither a K4 nor a loop controller from Loftur[0], but my dream is adding an ethernet interface to the latter and controlling it from the former.
[0] https://sites.google.com/site/lofturj/to-automatically-tune-a-magnetic-loop-antenna -- Phil On Mon, Nov 2, 2020 at 11:20 AM Wayne Burdick <[email protected]> wrote: > > > On Nov 2, 2020, at 7:51 AM, Jim Miller <[email protected]> wrote: > > > > This is mentioned in the online manual. However there's no suggestion as > to > > how it would interact with an external device. Obviously some code inside > > the K4 would need to do some signalling, perhaps written by an approved > ISV. > > > > How would it physically transmit commands? USB, Ethernet? > > > USB, Ethernet, or RS232. There's no limit on how this could be done, but > it hasn't been added yet. Do you have a particular antenna switch or other > device in mind? It could also be a rotator, etc. > > 73, > Wayne > N6KR > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
