No - the KXBC2 is not suitable for the Bioenno BLF-1203W, you should use the charger sold by Bioenno for this purpose. Bioenno products are LiFePo, a different kind of LiOn Chemistry than the Elecraft ones. The Bioenno charger will work for all the higher AH batteries they sell that have the DC Barrel connector. (I think that's up to 12AH). That Bioenno charger provides 15V 2A until the battery voltage reaches a certain level and then to a trickle charge level of .2A. I highly recommend 12AH battery for QRP use as well as field charging an HT. They are pricey to start but they provide 12V or better for the entire AH rating and are intended for 1000 or more full charge/discharge cycles. The life cycle cost is therefore lower than other batteries. I get a full 15W from my KX3 with the 12AH3.
-73- W1GCF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
