Yes, RX out is after the K3/K3S TR Switch and LPF. You will need to
turn on the RX ANT function. RX Out should be connected to to a
splitter with one output of the splitter going to the RSP1A (or other
SDR) and the other output of the splitter going to the RX IN.
A properly designed splitter prevents either receiver from "loading"
the other (excessive signal reduction) as well as preventing any
spurious products from one receiver being fed into the other.
73,
... Joe, W4TV
On 2020-11-14 11:31 AM, Jim McDonald wrote:
Can an SDR, such as a SDRPlay RSP1A, be connected to the RX OUT jack on the K3S
instead of using the IF OUT (on the radio or the P3)?
73, Jim N7US
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
