Dave,
If I am not mistaken, that board would be installed in a K3 that did not
have an ATU.
If you bought the K3 without the tuner and later installed the tuner,
that would be the reason you have it in your 'junk'.
73,
Don W3FPR
On 11/26/2020 6:03 PM, David Olean wrote:
I hope someone can steer me in the right direction. I was trolling
through my junk and found a new un populated PC board. I must have
bought it from someone on the Elecraft reflector, but I have no memory
of any of it! All I have is the PC board and a printed sheet with a
parts list. By board has "Copyright Arcom 2016 KANT3 REV 1.0" printed
on it.
The board has positions for 3 ICs and two small relays. It looks like it
was made to route extra antenna connections etc. but I have no
information on what it does or how it is implemented into the K3. Can
anyone point me towards a description on this accessory? I could find
no mention of anything with a google search.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
