I have been having the same problem lately. Quitting and restarting WSJT-X sometimes helps and once in a while I have found that Win10 has changed the audio settings from the KIO3B to the internal sound card. This seemed to start after a Win10 upgrade.
On Fri, Dec 4, 2020, 07:32 Joseph McIntire <[email protected]> wrote: > Hello all, > Yesterday I was running some FT8 on 17 meters. All of a sudden I noticed > there was no output out of the amplifier. Then looked at the radio it had > the red XMIT light on and two dash marks in place of SWR and said 0 Watts > out. So disconnected every thing except power and antenna switched antenna > switch to dummy and get the same thing on any band. Of course when you > depress The XMIT button it switches to CW. But I did hook a Mic up. With > the mic hooked up I got the red XMIT led with ALC on the display I would > see the ALC change as I was talking in the MIC. But when I switch over to > the display that shows RF out there is no indication of RF. Is this > something other people have had. I realize it could most likely be multiple > different thing but would these indications narrow it down to a section of > the radio like maybe the 100 watt amp. Or something like that. > > Thanks for all advice in advance > Joe AB3JN > > Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
