I have the new synthesizer.
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
From: Jim McDonald
Sent: Monday, December 7, 2020 11:19 AM
To: Reflector Elecraft
Subject: Re: [Elecraft] K3 shortened dits - you can remedy this under N1MM+
Wasn't this problem fixed with the new synthesizer?
73, Jim N7US
-----Original Message-----
Looking at it yesterday on the scope, a string of dits was about 40% duty
cycle, or even as low as 33%, depending on how you score the rise and fall
time. I did the test at 22 wpm and 44 wpm, and results were the same. Both
speeds were corrected by using keying compensation = 6.
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
First I’ve heard about this, and I’ve used K3’s since they were introduced.
Can you provide some details on why and how much the keying is lightened?
73, Dick WC1M
73, Dick WC1M
On Dec 6, 2020, at 9:45 PM, Dave Hachadorian <[email protected]> wrote:
I found out today that there is another way to change weight under
N1MM - config/ports/other tab/weight.
I wonder how many people do not realize that K3's lighten CW keying
applied through the KEY jack, and that their dits are wimpy? I
operated that way for 12 years, until W3LPL told me about it
yesterday. The K3 monitor sounds normal.
Life is too short for wimpy dits!
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
In N1MM+
Go to Configurer
Select WINKEY tab
Change value in the Keying Compensation window to 6 Magic
de Doug KR2Q
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
