Use the Kenwood diagram in the KPA manual. Use the pinout in the K2 manual for the serial port and wire accordingly. 3 wires (TXD, RXD, GND) is all you need from the K2. Then select SERIAL as the radio type in the KPA. You may also need RADIO POLL to be turned on.
Ken K6MR From: eric norris via Elecraft<mailto:[email protected]> Sent: Saturday, December 12, 2020 05:07 To: Elecraft Reflector<mailto:[email protected]> Subject: [Elecraft] Interfacing K2 to KPA1500? The KPA1500 Manual mentions using a K2 with serial interface for band data, but does not show how to wire it (that I can find). I can't find it in the nabble archive either. Does anyone know how to do this? Thanks and 73, Eric WD6DBM  ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
