Hello Barrie; ( I do not have product specific information on the KX2. )
A few comments/questions : - Did the person selling the KX2 make any representations as to the radio's condition ? - Do you know why the KX2 needed to have new finals ? Did the radio just suddenly cease transmitting or was there an associated event (static discharge, over-heating, etc) ? - After the finals were replaced were any measurements made to confirm that the KX2 was working properly on all the bands with the new parts installed ? - Are your measurements being made into a known good dummy load and with a good power supply ? - Have you browsed through the owner's manual so that you have a general idea what the various calibration procedures accomplish ? I'm not suggesting that you try to perform any of the procedures but rather are you familiar with them to the extent that you have an awareness of what they are ? Regards; Paul, WB5AGF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
