Windom is 20’ outside, pretty perpendicular to the house . No problem at 500W. 

Sent from my iPad 

> On Jan 4, 2021, at 5:22 PM, Jon Poland <[email protected]> wrote:
> 
> 
> Is the Windom in your attic or outside?  My guess is that your antenna is 
> parallel to the house wiring, and is inducing a current on the ground or 
> neutral wire.  A replacement AFCI breaker might fix the problem.  Or a heavy 
> choke on the AC.
> 
> This may or may not be your situation.  Most newer houses run all electric 
> wires from the breaker box up into the attic and back down to wherever they 
> need to be.  At least in single-story homes.  That puts the attic antenna 
> close to the unshielded house wiring.
> 
> In my house, it wasn't the AFCI that would go nuts, but the doorbell would 
> ring when I went over 35 Watts on 20m.  I had to install a choke on the 
> doorbell wire to stop that.  Now, every time I transmit, I imagine the 
> doorbell or smoke detector going off in my neighbor's 2-story next to me.
> 
> jon N0WL
> 
>> On Mon, Jan 4, 2021 at 2:32 PM Tom Doligalski via Elecraft 
>> <[email protected]> wrote:
>> Should have mentioned that there up is no trouble at 25 watts. 
>> 
>> Certainly no trouble at 100 watts back at Field Day. 
>> 
>> Sent from my iPad 
>> 
>> > On Jan 4, 2021, at 12:57 PM, Tom Doligalski <[email protected]> wrote:
>> > 
>> > Over the last several weeks I’ve been having problems with the arc fault 
>> > detector (AFCI) in my fusebox.This does not control the power to the 
>> > shack, but to our garage door operners.
>> > 
>> > It seemed random at first, but I think I’ve tracked it down a bit.
>> > 
>> > Running an Elecraft K3/KPA500/KAT500 combo. The AFCI ONLY trips when on 80 
>> > CW, running 100 watts (the KPA500 in standby bode). If the KPA500 is ON 
>> > (running 500 watts) there is no problem.
>> > 
>> > Seems fine on other bands….
>> > 
>> > 80M antenna is a Carolina Windom. The usual baluns/line isolator/grounding 
>> > stuff.
>> > 
>> > Any ides?
>> > 
>> > Kinda worried that there is an issue with the 100 W amp in the K3.
>> > 
>> > 73. 
>> > 
>> > Tom W4KX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to