I had a similar problem like this when using a SoundBlaster X G1 sound device. I solved it by only transmitting on one channel. If I use BOTH channels on output, it would do this weirdness.
Don’t know if that helps you or not. > On Jan 4, 2021, at 9:58 AM, john <[email protected]> wrote: > > Had a transmit problem with both FT4 and FT8 this weekend during the RTTY RU > contest. The data would transmit for a couple seconds (heard it in the > monitor, and saw output power), then the data stops. The K3 stays in transmit > (Red TX light) for the whole TX period, so I think the PTT configuration is > working. I was using it in conjunction with N1MM, but closed N1MM and used > WSJTx standalone, and had the same problem. Appreciate any ideas. > - 73, John, N0TA > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] Bill Coleman, AA4LR, PP-ASEL Mail: [email protected] Web: http://boringhamradiopart.blogspot.com Quote: "Not within a thousand years will man ever fly!" -- Wilbur Wright, 1901 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
