Bill, Since you will have the headers required for most of the options, you could get the boards and the on-board parts. The headers that you would not have are for the KAF2/KDSP2 and the KNB2, and you could order those headers (and the KNB2 standoff) separately. You will need a 2.7k resistor on the RF board for the KNB2 RF Board changes. The Rework Eliminator instructions will tell you how to proceed, but you will have most of the parts in the K2 option packages.
I do not believe purchasing the entire kit with all headers and hardware would be wise if you have ordered the K2 options. 73, Don W3FPR > -----Original Message----- > > New to the list and I will be building the K2/100 with KSB2, K160RX, and > K60XV soon. I recently saw the Rework Eliminator Plug & Play > kit and I'm > wondering if it would be a good idea to incorporate it into my K2. Since > I'm adding most of the accessories I want during the building process I'm > not sure if it's worth the $$. > > Any input will be appreciated! > > 73, > > Bill NZ0T > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
