I use Node Red to control and monitor the KPA1500. I have written into the flow to delay turn off of the amp when I click power off until the temperature of the amp is down to 38 C. The fans are programmed to turn off @ 39C. This way I can walk away after clicking OFF and not wait for it to cool off.
Node Red is free and the amp can be controlled from any web browser. 73 Dave wo2x -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Howard Sherer Sent: Thursday, January 21, 2021 8:19 AM To: elecraft <[email protected]> Subject: [Elecraft] KPA 1500 fan speed at turn off Wouldn't it be a good idea to keep the fan turned on in the KPA-1500 after you power it off till the internal temperature reaches its lower temp? Howard ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
