Hi All, Condensation on surfaces, to include the interior and exterior of equipment, is a function of ambient temperature and relative humidity.
At a given RH, we know the temperature at which condensation occurs as the Dew Point. I agree with previous posts that increasing temperature (above the Dew Point) will prevent condensation and suggest that this is a lot easier in "drafty" volumes than is reducing the humidity. I have a very well insulated house in New England with an uninsulated drafty basement shack; somewhat better than a tent. I suggest that to prevent condensation in and on gear, it is simpler and more economical to just leave the gear on. Enough heat is produced, in my experience, and it is produced in the right place. We are not worried about filament lifetime in modern gear. Leaving a large Xcvr on consumes maybe 20-40W, while heating my shack 15F degrees electrically, consumes over 2kW. 73, Steve KL7JT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
