What is the length of the coax jumper between the radio and dummy load? Also, if an antenna analyzer is available, run a sweep on the load, with the meter in place and observe the results.
73 Bob, K4TAX Message: 11 Date: Thu, 28 Jan 2021 10:50:35 -0500 From: Bill Steffey NY9H<[email protected]> To: Elecraft List<[email protected]> Subject: [Elecraft] 10 mhz problem ...while running tx gain Message-ID:<[email protected]> Content-Type: text/plain; charset=utf-8; format=flowed i am very rarely on 10 mHz, while running tx gain set , the calibration fails at 10mhz due to ? SWR 3.3-1 TOO HIGH FOR CALIBRATION. checking other bands..160- 6 all read low swr lp-100 & WATERS swr/load? read low swr ..... ? hi swr? just reads on radio & faults the tx gain procedure ???? ideas ??? -- This email has been checked for viruses by AVG. https://www.avg.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
