It remembers mode per band as last used.
Now, if you turn the radio off by switching off the power supply first,
it likely won't remember the last mode. There is a power down imminent
circuit that saves the data when one powers down the radio by the front
panel switch. If one shuts the power supply off, the PDI circuit does
not save the last used data. Notice when one presses the POWER switch
the radio does not go off immediately? This is the PDI doing its job.
73
Bob, K4TAX
On 2/3/2021 12:14 PM, [email protected] wrote:
Message: 12
Date: Wed, 3 Feb 2021 13:59:07 +0000
From: "David F. Reed"<[email protected]>
To: Elecraft Reflector<[email protected]>
Subject: [Elecraft] K3 does not change mode properly with band change
Message-ID:<[email protected]>
Content-Type: text/plain; charset=utf-8; format=flowed
Being an intermittent problem, it is hard for me to figure out but I am
hoping some of you have seen and solved this...
Let's say I am on 40, LSB; sometimes when I change bands to 20M, it
stays in LSB; sometimes it correctly changes to USB.
Any ideas what is going on or how to fix it?
Thanks & 73 de Dave, W5SV
--
This email has been checked for viruses by AVG.
https://www.avg.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
