Greetings all, I’ve been using HDSDR with Omin-Rig with a Xiegu G90 and was able to get the panadapter setup working with my KX3 by itself. Now I want to add my KXPA100 into the setup and am wondering how the cabling should be configured.
I have my computer connected from the KX3 ACC1 port through the KXUSB cable to my computer. I also have the KX3 RX I/Q port connected through a USB sound card to my computer. All seems to be well in this configuration. Looking at the KX3 manual and Cady’s The Elecraft KX-Line book, it seems that I would connect the amp through the KXPACBL control cable. This hookup looks like I need to connect both the ACC1 and ACC2 end of the control cable to those ports on the KX3. Do I just let the ACC1 end of the control cable dangle? Is anyone else running a similar setup that can provide some insight? Thanks in advance 73 - John - n0hj ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
