fyi Gerald
I just had a similar issue.
The coax connection between the ANT1 SO239 and the board shorted at the
crimped TMP connector
(after two years of use). Elecraft support (Rob) was helpful in
troubleshooting too.
Might check the spark gaps on the board too
cheers
dink, n7wa
On 2/13/2021 11:13 AM, gerald.eberle wrote:
Hi All
While I’ve used my KX3 / KXPA100 with ATU in the Rtty contest a fault was
displayed and ANT1 did not work anymore. No receive and high swr. PA and ATU on
ANT2 are working as expected and the relays is switching between the 2
antennas. I think I’ve fried something on the input of ANT1. Where should I
start to search? Any help is appreciated.
Thanks and 73
Gerald HB9CEY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
