Adjusting the AGC threshold and slope on my K3 to my liking made all the difference for me. I did the same on the KX3 and KX2, as well.
Tim On Wed, Feb 17, 2021 at 11:21 AM Don Wilhelm <donw...@embarqmail.com> wrote: > Mike and Brett, > > Go to my webpage www.w3fpr.com and scroll the left column to the "Noisy > K3" article for assistance in adjusting the AGC Threshold and slope. > > 73, > Don W3FPR > > On 2/17/2021 1:57 PM, NJMike wrote: > > Brett, I am new to the K3S. I set mine according to the Fred Cady book. > > Mine are slightly different from yours. But I don't have a good > > understanding of how the settings affect the performance. Sometimes I > think > > the rig is very noisy, even when connected to a dummy load. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ae...@worldwidedx.com > -- Owner, worldwidedx.com AE6LX, Amateur Radio ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
