I meant to say "I tied PTT1 and PTT2 from the WKUSB together and fed..."
Joe, KO8V > On Feb 25, 2021, at 19:09, Joe DeVincentis <[email protected]> wrote: > > As I said, I have the WKUSB. > > I tied PTT1 and PTT2 from the WKUSB and fed that to the PTT on Pin 4. > > I used KEY1 for CW, KEY2 for FSK - that went to Pin1 and then Pin 5 for the > grounds from KEY1, PTT1 and PTT2. > > IIRC, I set that scheme because FLDIGI expects KEY2 for RTTY. > > I also had to change the default configuration via the demo program so the > keyer comes up in RTTY mode rather than CW. Either N1MM or FLDIGI had an > issue that it was not correctly setting the mode in the keyer when it started > up. I think the S/W has since been corrected. I did report it. It's just > been too long for me to remember exactly which software had the problem. > > BTW, I used one of these for the connection to the ACC port. It makes it so > much easier not having to solder tiny pins: > > https://smile.amazon.com/gp/product/B0876JTYQ2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 > > Joe, KO8V > >> On Feb 25, 2021, at 18:12, Leroy Buller <[email protected]> wrote: >> >> Well, I meant 3.1. The newest version. Could you explain the connections >> you used? Pin 1 for fsk. Pin 4 for ptt. Pin 5 for ground. Another >> components? >> >> Lee >> >> > > ______________________________________________________________ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
