So is it true that the WKmini doesn't remember anything upon disconnecting?
w8lvn On Sat, Feb 27, 2021 at 8:01 PM Julia Tuttle <[email protected]> wrote: > I don't think so -- you'd need an adapter that just doesn't connect that > pin. > > On Sat, Feb 27, 2021, 20:19 Bill Lederer <[email protected]> wrote: > >> Folks: >> >> I recently bought a WKmini to use for portable operation. In reading the >> documentation, it turns out that the cable supplied that goes from the OUT >> port of the WKmini to the key jack on the KX2 keys the tip with the code, >> but use the ring to do a PTT function. I'm fine with QSL on the KX2, so I >> don't need this. And in fact, the KX2 will key when either the ti or ring >> is engaged by the WKmini. >> >> Experimenting with the MacWinKeyer.app, there is a selection to turn off >> the PTT function, and that works nicely. I had hoped that exting the >> program would leave that setting in the "no PTT" mode, but it is not to >> be. >> >> So is there a way that the KX2 can be convinced to only pay attention to >> the tip when the mode is set to "Hand" and not the ring? >> >> Thanks, >> w8lvn >> >> -- >> --w8lvn-- >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> > -- --w8lvn-- ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
