I had the very same set up for a couple years, which was easy and worked
fine with FT-8. When I was having trouble with WinLink, another ham
suggested a Signalink sound card would help, and he was right. I now
use the SignaLink with FT-8, with maybe better results, but it's hard to
tell.
Anyway, the SignaLink Web site says to change the name of the radio in
settings in FT-8 from KX-3 to <none>, but I'm not sure why. All works
fine either way, except I lose CAT control, so have to change the
frequency on the KX-3 manually when I change bands. Any thoughts?
david KC1DNY
in the woods of Maine.
On 3/6/2021 12:49 AM, Jim Rhodes wrote:
I did very little to set up FT modes on my KX3. Got a cheap USB sound card
with a line in jack. Use 2 stereo audio cables with 3.5 mm plugs at each
end. One from phones jack on KX3 to line in on sound card, Other cable goes
from mic connector on KX3 to speaker jack of sound card. Set mode to Data,
set submode to Data A. Using WSJT-X there is a rig selection for Elecraft
KX3. I set it up for CAT PTT if I remember correctly. Once you have the rig
set properly you need to set the levels, I find it is best to set both the
WSJT-X level slider about a third of the way up and the output level of the
sound card similarly. Then using the Tune button in WSJT-X adjust the
MIC/LINEIN pot on the KX3 to get 4 solid bars of ALC with the 5th one just
flashing then use Power setting to adjust output level. Adjust output level
to your sound card for a reasonable level on the waterfall display.
On Fri, Mar 5, 2021 at 6:56 PM Alan Geller via Elecraft <
[email protected]> wrote:
With FT8 coming on strong as a popular communications and testing tool, it
is
tempting to dedicate your KX3 to this mode for a slice of time each day.
There has been little to no
update info for the KX3 with popular sound card interfaces (eg Signalink)
as well as suggested
settings for the KX3 and WTSJ-x itself. A little info would be very much
appreciated from Elecraft or a crafty
experienced user. Thanks in advance. alan….K6ADG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
