Hello Eric, It's in theKPA100 manual, at the back under Specifications:
DC relay coil pulled to ground 1A at 200 VDC (do not use with AC-controlled relay) P59 in my book, which I just noticed, comes right after p62..... ---- 73, Mike Cizek W0VTT -----Original Message----- From: [email protected] <[email protected]> On Behalf Of eric norris via Elecraft Sent: Tuesday, 16 March, 2021 21:11 To: Elecraft Reflector <[email protected]> Subject: [Elecraft] K2/100 Amp Keying Limits? Can anyone tell me what the external amplifier keying limits are for a K2/100? I'm trying to use an AL811H, which has 14.5V at 10ma on the relay jack. Do I need an external interface? I cannot find the answer in the K2/100 manual. Thanks! 73, Eric WD6DBM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
