My P3 does the same thing. If i keep cycling power it eventually comes on and works. I suspect there is a bad capacitor in the LCD backlight power. I have not actually looking into it yet.
-- "If you are not the lead dog, the scenary never changes" Rick Stanback N4WCQ On Mon, 2021-04-12 at 04:41 -0700, Dave Cole wrote: > A bit more data: > > 1. The (3 utility can talk to it. > 2. If I try and capture an image, it goes through the motions, but > no > image is captured. > 3. It accepts commands via a keyboard. > 4. A load from the last config file did not correct things. > 5. A full power off and on did not correct things. > > 73, and thanks, > Dave (NK7Z) > https://www.nk7z.net > ARRL Volunteer Examiner > ARRL Technical Specialist, RFI > ARRL Asst. Director, NW Division, Technical Resources > > On 4/12/21 4:27 AM, Dave Cole wrote: > > Hello, > > > > My P3 seems to have had a display failure. The SVGA is working, as > > I > > can control the K3 via macros fired at it via the keyboard input. > > It > > failed to light off once before, but that seemed a one off thing, > > not it > > seems permanent. > > > > Has anyone seen this before? If so, what was the cause? > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
