I made up the cable from the Molex to the TUNE on the KAT500 as
described and have checked continuity from end to end. All OK.
I have the SEND from the 7610 connected to the PTT RLY on the KAT500.
When I change bands, nothing happens. Is there another setting I need
to change in the 7610?
Buck, k4ia
Honor Roll
8BDXCC
EasyWayHamBooks.com
On 4/19/2021 10:35 AM, Lyn Norstad wrote:
Buck -
The KAT500 Rev D1 Manual, pages 13, 14 and 15 cover the Icom connections.
The "AH4" cable (the one you're describing) powers the KAT500 and controls
the "Tune" function. If yours isn't doing anything, the cable is probably
defective.
What else do you have connected?
73
Lyn, W0LEN
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Buck
Sent: Monday, April 19, 2021 7:42 AM
To: [email protected]
Subject: [Elecraft] Controlling KAT500/KPA500 with Icom 7610
Anyone who has succeeded, I could use some help. The connection from
the 7610 molex antenna tuner jack to the "Icom in" jack on the KSAT500
doesn't do anything.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
