My K3 s/n 2324 has developed a problem with its output power. It is very non-linear especially between 12 and say about 50 watts. Output is low until about there and I do not get full output on some bands, for example I can only get about 35 watts now on 6m. I have attempted to do the TX Gain Calibration but is always fails. Elecraft tech support has advised me to try the "three finger test" to test the KLPA3. I may have access to the PA board of another K3.wondering if I could just swap them out to determine if that is where the problem is??
Allen R. Brier N5XZ 1515 Windloch Lane Richmond, TX 77406 713-705-4801 -- This email has been checked for viruses by AVG. https://www.avg.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com