Hi Don,
From page 3, specifications, of the XV144 Owner manual, the I.F. iput power
range is from -20dBm to +39dBm.
According to operation manul of IC7800, the transverter terminal output
level is -20dBm (or 22mV).
Does this mean that I.F. output of my IC7800 can still drive the XV144 to
the designed power level of 20 watts?
Looking for your advice.
TNX & 73
Johnny Siu VR2XMC
From: "Don Wilhelm" <[EMAIL PROTECTED]>
Reply-To: <[EMAIL PROTECTED]>
To: "johnny" <[EMAIL PROTECTED]>,<[email protected]>
Subject: RE: [Elecraft] XV144 input level selection
Date: Sun, 23 Jul 2006 22:54:13 -0400
Johnny,
Re-check that output level because it seems quite low. 22mV into a 50 ohm
load is only 9.7 uW power. I would expect something more on the order of 1
mW and upward.
73,
Don W3FPR
> -----Original Message-----
> The transverter output level of my IC7800 is 22mv. Could any of
> you advise which input level I should select for the XV144? 1 mW
> or 251 mW?
>
> TNX & 73
>
> Johnny Siu VR2XMC
>
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
