One of your antennas might be disabled. Check the KAT500 Utility, Configuration, Edit Configuration, Antennas tab. Perhaps the "Enabled" checkbox is off for ANT2. This is a per-band setting.
73 de Dick, K6KR -----Original Message----- From: [email protected] <[email protected]> On Behalf Of richard gilley Sent: Thursday, April 29, 2021 17:23 To: George Pasek via Elecraft <[email protected]> Subject: [Elecraft] KAT500 Locked on Ant 1 Looking for thoughts on my KAT500 that remains locked on Ant 1, cannot change to ant 2, manually or via the Elecraft utility regardless of the mode setting, Set configuration to a later set up still no joy. And of course does not tune, no relay actions, no caps set or inductors shown in utility. I am not aware of any electrical storms in the area. Appreciate hearing from anyone who has an idea. Thank you all. AD1G ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
