In the Config Menu: PWR SET If set to PER-BAND, the power level is saved on each band. This is especially useful with external amplifiers.
Mine is set to PER-BAND. If a KPA500 is connected to the K3S via the ACC cable (as mine is), two sets of per-band power settings are saved: one for “barefoot” operation, one for use with the amp. Where and how do I save and then access these two savings? Are the somehow automatically selected? In my case I want to save 100 watts for "barefoot" operation and 25 watts for amplifier operation. I've tried using Quick Memories 1-9 for bands — which works fine — and Quick Memories M1 and M2 for the two power settings for each band — which does NOT work. What's the right way to do this? Richard Kunc ~ W4KBX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
