I travel with my computer and connect it to my K3 (upgraded)
every time I go on the air. The last time I started operating, I
noticed that my P3 did not know the frequency the K3 was using.
I then noticed that I hadn't plugged the USB connection between
the K3 and the computer into the computer. I plugged it in and
everything worked again.
I think this may have been because the K3 needs to be polled in
order to send the frequency data. (There is a menu option to
automatically send the frequency data. I am away from the radio
so I can't check how it is set on my K3.) Hooking the radio to
my computer let the logging program provide the polling.
73 Bill AE6JV
On 6/8/21 at 10:15 PM, [email protected] (George
Thornton) wrote:
I have a more or less fully loaded K3 with the synthesizer
upgrades. The K3 was gone through at the factory and appears
to be running well.
I have a P3 that also has the SVGA card and the transmit monitor add on.
On a number of occasions my P3 seems to freeze and fails to
move with tuning as I turn the tuning knob.
Before I call Elecraft for guidance I wonder if anyone has any suggestions.
THANKS.
-----------------------------------------------------------------------
Bill Frantz | "The only thing we have to | Periwinkle
(408)348-7900 | fear is fear itself." - FDR | 150
Rivermead Rd #235
www.pwpconsult.com | Inaugural address, 3/4/1933 |
Peterborough, NH 03458
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
