1. The single USB cable is all that's needed.
2. The USB setting was already set to RS232, all that's needed. In using the Elecraft Utility to check the connection, the rate for the connection was 38,400 b/s. I had entered only 9,600 b/s into Winlink Express. The Elecraft K3S operation manual explains how to check which port on the computer that the K3S appears on. (Windows: Device manager/ Ports: plug/unplug the device) The K3S was on COM4. (Although no other devices were attached, COM3, was taken by something. Beware.) Actions: In Winlink Express / ARDOP Connection settings/ Radio: Set both ports to COM4 and the rate to 38,400 b/s. Neat! Chris NQ8Z -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
