Thanks Ken. Your advice is helpful. I have set the transmit delay to 15ms.
I have found lots of info on using the IC7300 with the KAT500/KPA500 combination but none on using the setup that I have, ie., IC7300 exciter, to KPA500 with LDG AT-1000 Pro II autotuner. I will make sure that I don't pump full watts into LDG tuner during tuning (I will use only the IC7300 to do the tuning) or not to present a high SWR to the amp. As you know with the IC7300, I use the "tune" button on the IC7300 and it limits the output to 10 watts for the LDG tuner to go through its tuning cycles (the internal tuner in the IC7300 is bypassed when wired to the LDG tuner). I have tried to get some responses in other forums but no luck. -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
