While building the K1, I had to come up with a signal source for alignment
on 30m and 17m. The Norcal tuner upper for 30m (10116 kHz) works great as
a signal source, but I had to resort to a noise generator for 17m.
So I figured I could build myself an XG-3, the WARC band signal generator.
I ordered another XG-2, and replaced the 20m, 40m and 80m crystals with the
following:
X1 - 24906 kHz (12m)
X2 - 18096 kHz (17m)
X3 - 10106 kHz (30m)
I could have used the 18100 kHz crystal left over from building the K1 for
X2, and the 10116 kHz crystal stolen from a second Tuner Upper kit for X3.
I purchased the crystals I used from Expanded Spectrum Systems for $2.55
each. It seems to works just fine!
The last thing to do was place little labels over the silk screened numbers
on the board. Put a "12" sticker over the 20, a "17" sticker over the 40,
and a "30" over the 80.
One final sticker - place a XG3 WARC sticker over the XG2 on the board.
If I am not the first to do this, then I apologize for the waste of
bandwidth. Otherwise, feel free to build your own or bug Eric and Wayne
into making this an official kit.
Dan
-----
KX1 #1507
K1 #2222
K2 #xxxx
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
