I’m pretty sure the first homebrew project I ever made was a switched outlet strip using utility boxes on a 1x3. Might be worth doing that again and adding some good filtering.
wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Jul 2, 2021, at 1:10 AM, Jim Brown <j...@audiosystemsgroup.com> wrote: > > On 7/1/2021 2:24 PM, Bob McGraw wrote: >> One thing that really concerns me is the use of power distribution strips. > > That's the least of the problems -- the MOVs built into many (most?) strips. > advertised as surge protection are more likely to CAUSE destructive failures > of interconnected equipment than to protect it. > > Bob has the right idea -- build your own multi-outlet boxes from standard > electrical parts. See page 23 of http://k9yc.com/RFI-Ham.pdf > > These boxes and the generator choke were added to the ARRL Handbook several > years ago. > > 73, Jim K9YC > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com