K3s/KAT500 As I now understand Frequency Tracking, it works like this:
1. Once the KAT500 is "trained," the frequency segments attributed to each band are places where the KAT500 will look for good SWR matches. In other words, if I happen to have the VFO set on a frequency that is in Segment 5 (my label, just for clarity), the tuner will for for good matches in Segment 5 — correct? 2. If no good matches are found in Segment 5, the KAT500 will do a Full Tune to create one — correct? 3. It seems to me that "Training the Tuner" is truly a convenience exercise: populating segments in the band so the tuner will find a good match and not have to do a Full Tune — correct? 4. Rather than setting just low, middle, and high tuning solutions on 20 meter SSB, for example, I set a solution in each of the 11 segments, thinking that no matter where I tune in 20 meter SSB, the KAT500 will find a good solution. — correct? Have I got this right . . . finally? Cheers, Richard Kunc W4KBX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
