Yes Don, This was most helpful and crystal clear. On the basis of your appreciated explanations I made up my mind what to do. This is a great reflector.
Thanks very much ! Peter, PE1E ----- Original Message ----- From: "Don Wilhelm" <[EMAIL PROTECTED]> To: "PE1E" <[EMAIL PROTECTED]>; "'Elecraft List Members'" <[email protected]> Sent: Saturday, July 29, 2006 6:41 PM Subject: RE: [Elecraft] Rookie help cry : A or B PCB , version C or D ,firmware 2.01 or 2.04 ? > Peter, > > Yes, there is a lot of information for anyone on revision levels. > First let me say that any K2 will work great if properly constructed and > aligned. I would never say that the older ones are inferior to the newer, > that is too strong a word. > > Any older K2 can be fully upgraded to the newest level at moderate cost, and > the changes are done without a large number of components added to the > boards (it will still look very neat when completed). snip ...( PvD ) _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
