Try this:
https://marc.info/?l=elecraft&m=145323127930319&w=2
Unfortunately, the link near the bottom for the more robust replacement
part doesn't work anymore, but maybe someone can come up with the part
number. I've got a bunch of them at home, but I'm on vacation. The
robust replacement is slightly larger in size, but it will still fit on
the solder pads if you are careful.
Dave Hachadorian, K6LL
Big Bear Lake, CA
On 7/18/2021 9:34 PM, Connie Marshall wrote:
While operating SO2R the 'HIGH RF" warning flashed on the K3 display.
Before I could react and stop the transmission on the other radio the
front end got zapped. The radio is down about 50 db on RX. I checked
Ant 2 and RX antenna and the same problem so probably not the surge
protectors on each of these inputs. Any ideas on what part goes out
when this happens. The TX radio was on 20 meters and the RX radio was
on 15 meters.
Connie / K5CM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
Dave Hachadorian, K6LL
Yuma, AZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
