Your power supply isn’t regulating very well. Could be the power supply is 
having an issue. Or it is too small for the task. In tbe USA it is not uncommon 
for ham supplies to be somewhat overrated. For example many Astron 35A supplies 
are really the equivalent of a commercial 25A supply. 

> On Jul 24, 2021, at 8:38 PM, Peder Kittelson <[email protected]> 
> wrote:
> 
> Thank you all for your help in reviewing my K3s transceiver in-line fuses,
> the fuse locations (they are near the power supply) and available voltage
> from my power supply for the K3s.
> 
> *I have a strange voltage pattern*.  The K3s manual says the voltage for
> the transceiver should be:  13.8 volts nominal, 11 volts minimum, 15 volts
> maximum.  The manual also says there should be only a voltage drop of .5
> watts.
> 
> My standing, receiving voltage is 13.9 volts.  When I transmit @100 watts, 
> *the
> voltage drops to 13.4 volts* which is right on the recommendation numbers,
> so that seems good.
> 
> When I tune @ 20 watts, *the voltage drops to 12.6 volts*. Is that a
> problem?  Why is that number so much lower?
> 
> In both cases the signal goes through an external Palstar BT1500A tuner for
> my window line going to an extended multiband Zepp antenna.  In both these
> cases the internal k3s tuner is not activated.  There is no difference in
> the tuning, locally or externally by the Palstar tuner.
> 
> So does anyone have a guess at why this should be?  Do I need to make a
> change somewhere?
> 
> 73 and thanks to everyone,
> 
> Peder, W7RPK
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected] 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to