Mike,
I haven't seen anyone mention this before, so make sure you haven't hit
the "ANT" button and moved the selected antenna to the open PL-259.
Probaly should show ANT1 on the display. If it shows ANT2, hit the ANT
button on the front panel and re-select the right antenna.
Jim, W0EB
------ Original Message ------
From: "Mike Harris via Elecraft" <[email protected]>
To: [email protected]
Sent: 8/8/2021 8:02:25 AM
Subject: Re: [Elecraft] Need help.
Hi Rick,
Have you tried reloading a saved working configuration? Does the red TX led
illuminate? If you press the TUNE button is there any output and what does the
SWR indicate.
Regards,
Mike VP8NO
On 07/08/2021 23:16, Richard Isaacs via Elecraft wrote:
I recently purchased a K3 and Panadapter.
No issues since June. Last night after using the radio, covered and went to
bed. This morning…it’s like the antenna is not attached. No receive and when
keying the mike…no transmit. All other radios work off my Butternut antenna.
Went into utilities and reloaded 5.67…still nothing.
Please help and thanks in advance.
Rick
W3RKI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
