Robin,
That will not work. The KPA100 depends on internal signals from the
base K2 such as AUXBUS and several other signals to operate and control
power output. In other words, it is an amplifier dedicated to the K2
and not a general purpose amplifier.
The KXPA100 and KXAT100 would serve you better than cobbling up an
interface that would be quite complex.
he signals needed are those in the 9 pin AUX IO connector. AUXBUS
allows the base K2 firmware to 'talk' to the KPA100 firmware IC as well
as the KAT100 firmware.
73,
Don W3FPR
On 9/29/2021 10:59 AM, Robin Tew wrote:
Hi All
Just thinking about using the KPA100/KAT100 EC2 Combo with the Icom 705.
Any pointers,ideas,tips etc. To achieve this?.
Many thanks
Robin G4JDO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com