Brian:
I suggest you get WSJT-X working as a stand-a-lone application before
getting the other applications running. This will allow you to get the
audio levels for RX and TX configured. And will allow you to use CAT
control for the radio and PTT mode.
DX Labs and Win4K3 can come on board later. It is much easier to debug
software system integration one step at a time.
73
Bob, K4TAX
On 11/10/2021 12:31 PM, [email protected] wrote:
Message: 18
Date: Mon, 8 Nov 2021 19:22:02 -0500
From: Brian Deuby<[email protected]>
To:[email protected]
Subject: [Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8
etc.
Message-ID:<[email protected]>
Content-Type: text/plain; charset=UTF-8; format=flowed
I'm interested in getting my feet wet in WSJT digital modes, but don't
know how to configure my K3, DXLabs Suite and Win4K3 to do this. I've
checked the K3 manual, Fred Cady's more detailed K3 book and poked
around the DXLabs and Win4K3 sites, but don't see how to get started.
Can anyone direct me to a good source(s) of information on this?
73,
/Brian K8GRR/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
