The K3 has been sold. Thanks for your interest. On Mon, Dec 20, 2021 at 6:05 AM Charles Tropp <[email protected]> wrote:
> Elecraft K3/100 160-6m Transceiver Serial #2502 with the standard 2.7 kHz > filter, the KAT3 Internal Auto Antenna Tuner, KPA100W Amplifier and XRX3 > Subreceiver. The subreceiver is identical to the main receiver and has its > own 400Hz filter. It can tune the same range of frequencies as the main > receiver and is terrific at busting DX pileups. > > - This K3 also comes with lots of extras including: > - Three (3) additional CW Filters: 700Hz, 400Hz and 250Hz for the > utmost in selectivity. > - KXV3A Interface Option which provides a separate receive antenna > input and output, an input and output for use with an external transverter, > and a buffered i.f. output. (Handy for adding an external Panadapter or > SDR). > - The K3 has been upgraded with the KSYN3A synthesizers in both the > Main and Subreceiver. The synthesizer produces cleaner synthesized signals > leading to better transmitter and receiver performance and has a better > switch time to improve TX/RX switching for high speed CW. > - There is no internal sound card in this K3, but included in this > bundle is the TigerTronics Signal Link USB interface which adds an external > sound card and comes with the Elecraft connection cable and complete > documentation. Just what you need to work the new digital modes such as > FT8. > - You can connect a PC that has a serial port to download firmware and > software upgrades as well as to allow computer control of the K3 with your > favorite contest and general loggers. No serial port? No problem—I include > the original Elecraft KUSB Universal Serial Bus Adapter cable which allows > you to simply plug the K3 into an available USB port. > - This K3 was upgraded, calibrated and aligned by the Elecraft Factory > in 2015 to meet or exceed all factory specifications. > - The installation and operation manuals are included as well as all > upgrade and repair documentation. > - This unit is sold *AS IS *and subject to the following *caveat* which > may or may not be of concern to you: I am unable to get my Begali Single > Lever Paddle to work properly with the Elecraft Internal Keyer. I can only > send dits or dahs (depending on the menu option) but not both. In other > words one side of the paddle does not work. There may be a problem with the > paddle jack connection. I have always preferred to use either a straight > key or my external Winkeyer USB as it performs well with the software > programs that I use and it plugs directly into the Key Jack which works > fine. > > > I am asking $1,695 for this package + Shipping via Priority US Mail to > CONUS. > > > -- > *73, Charles N2SO* > > -- *73, Charles N2SO* ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
