Aargh! Aargh! Aargh! (Sound of head banging on desk.)
The problem was that I did not have the K3s set to use the line input!
I.e., MAIN:MIC SEL menu entry was not set to LINE IN.
I feel stupid for overlooking this setting, but honestly I don't
remember doing it in the past when setting up for other RTTY contests,
or switching back to MIC afterward. I need to check MMTTY and N1MM to
see if either sends any commands to the K3 to do this automatically.
To make matters worse, I have a text document that shows connections and
settings for the K3, but it didn't mention the MIC SEL menu entry; it
only said to set the MIC (line) level. I completely missed the implied
line input selection. You can bet that is now fixed!
So, problem solved. THANK YOU to everyone who offered suggestions here
and via private email. I hope I can avoid this embarrassing situation in
the future.
--
73, Mike N4CF
Louisa County, VA USA
Elecraft K3s / P3 / KPA500 / KAT500
Carolina Windom up 45'
http://n4cf.mdodd.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
