Hi,
If it were me, I would bypass everything and feed the antenna directly
to the K3. If things work after that step, it is not the K3.
Again, if it were me, I would begin adding things back, one at a time,
until the failure returns. At that point, I would conclude that the
last device added was failed, and look there.
If it is the K3, I would then come back from my last backup of the
settings and see if that fixes things...
If that fails to bring the K3 back, I would re-post my question, with
all the test info I have gathered above.
I would call support, but the last time I called, I got a message, not a
person.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/15/22 08:15, rikoski wrote:
I have a K3, P3, KAT500 and KPA500. I was listening in the middle of a QSO and
lost signal.
I tested my antenna with a back up transceiver and the antenna and coax are
good.
The P3 still shows signals but only hiss comes out of the K3’s speaker.
Keying the k3 by pressing the attached foot pedal turns on the red Tx light on
the K3 but the display on the KPA500 shows an asterisk to the left of the power
out reading of zero on its display.
No signal goes to the antenna and nothing besides hiss comes out of the speaker.
What should I do next?
Thanks. W9ZD
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
